Purchase Products Here:

UV Blocking Protection Coatings

For Outstanding Moisture Barrier and Resistance

AI Technology, Inc. has more than 30 years of experience creating materials for extreme environments including NASA electronics.  SOLARBLOC™ SC7050-UVB  and SC7130-UVB environmental protection coatings are innovatively engineered for industrial and consumer applications.

Bridge

AIT SOLARBLOC™ SC7050-UVB  and SC7130-UVB coatings provide the unparalleled protection against the combination of UV, salt-fog, and water exposure.

AIT’s molecularly engineered coatings have been designed for large industrial applications, yet are easy to apply with ambient curing for DIY projects.  Our coatings have proven performance protecting metals, plastics, ceramics and other structural materials for over 30 years.

AIT SOLARBLOC™ SC7050-UVB  and SC7130-UVB coatings can be used on bridges and other super-structures that are exposed and near water cutting down on costly and inconvenient/constant maintenance.  They can be applied onto existing coatings to provide additional protection for extended years between maintenance.

Designed And Engineered For:

  • Protecting painted metals like siding, metal roofs, metal buildings, and doors
  • Marine and coastal environments for protecting metal rails and parts around pools.
  • Applicable in protecting the beauty of unpainted metals such as stainless steel, brass, copper, etc.
  • Ideal for protecting structures of hard to reach metal and decorative pieces and high rise structures and tall buildings
  • Protecting interior decorative metals: brass, bronze, copper, zinc, aluminum, silver and other easily tarnished metals and alloys
  • These fluorinated polymers are also safe for food contacts

Application is easy:

  • Ready to use one part coating: No mixing and no waste
  • Transparent coating is crystal clear for life-time protection: will not yellow under direct sun exposure
  • Colored coatings for life-time color fast protection
  • Flexible: Will not crack, chip or peel over time
  • Outstanding adhesion to most materials: metals (including polished) stones, ceramics and most plastics.

UV Resistant And Moisture Blocking Coatings

AIT Product Characteristics Electrical Adhesion Pot-Life Curing/Drying Schedules
SOLARTHRU

SC7050-CLEAR

  • Crystal clear transparent coating
  • Fluorinated for proven UV stability
  • Outstanding moisture resistant & barrier
  • Outstanding adhesion to metals, woods, stones and ceramics
  • Allow UV and wide spectrum of solar energy to pass through
Insulating >1014 ohm-cm
  • >10 ppi
  • >#2H pencil scratch resistance
Non-curing Ambient drying @ 60 min for 75 micron thickness
SOLARBLOC

SC7050-UVB

  • Crystal clear coating
  • UV-A and UV-B blocking for protection over coatings and plastics
  • Fluorinated for proven UV stability
  • Outstanding moisture resistant & barrier
  • Outstanding adhesion to metals, woods, stones and ceramics
Insulating >1014 ohm-cm
  • >10 ppi
  • >#2H pencil scratch resistance
Non-curing Ambient drying @ 60 min for 75 micron thickness
SOLARBLOC

SC7053-WHITE

  • White colored version of SC7050-CP
  • Protective in blocking UV and resistant to UV or direct sun exposure
  • Protective and resistant to moisture and heat environment
  • Ideal for marine and coastal protective coating of metals and plastics
Insulating >1014 ohm-cm
  • >10 ppi
  • >#2H pencil scratch resistance
Non-curing Ambient drying @ 60 min for 75 micron thickness
SOLARBLOC

SC7053-RED

  • Red colored version of SC7050-CLEAR
  • Protective in blocking UV and resistant to UV or direct sun exposure
  • protective and resistant to moisture and heat environment
  • Ideal for protecting metals and plastics in coastal and marine environments
Insulating >1014 ohm-cm
  • >10 ppi
  • >#2H pencil scratch resistance
Non-curing Ambient drying @ 60 min. for 75 micron thickness
SC7053-BLUE
  • Blue colored version of SC7050-CLEAR
  • Block and protect against UV and direct sun exposure
  • Protect against moisture and heat environment
  • Ideal for protecting metals and plastics in coastal and marine environments
Insulating >1014 ohm-cm
  • >10 ppi
  • >#2H pencil scratch resistance
Non-curing Ambient drying @ 60 min. for 75 micron thickness
SC7053-GRAY
  • Gray colored version of SC7050-CLEAR
  • Block and protect against UV and direct sun exposure
  • Protect against moisture and heat environment
  • Ideal for protecting metals and plastics in coastal and marine environments
Insulating >1014 ohm-cm
  • >10 ppi
  • >#2H pencil scratch resistance
Non-curing Ambient drying @ 60 min. for 75 micron thickness
SC7053-BLACK
  • Black colored version of SC7050-CLEAR
  • Block and protect against UV and direct sun exposure
  • Protect against moisture and heat environment
  • Ideal for protecting metals and plastics in coastal and marine environments
Insulating >1014 ohm-cm
  • >10 ppi
  • >#2H pencil scratch resistance
Non-curing Ambient drying @ 60 min.for 75 micron thickness

For more information:

AIT Solve My Problem

AIT sales and service: 1-609-799-9388 or 1-800-735-5040
Fax: 609-799-9308.