You are here: Home » Products & Solutions » EMI/RFI Shielding & ESD Protection Materials » ESD Protection Coatings & Materials
Print this page

ESD Protection Coatings & Materials

AIT manufactures some of the most unique semi-conductive adhesives, coatings and rubber sheets for electrostatic dissipative applications. The following tables list some representative products.

ESD Protective Coatings and Materials

UV Resistant, Semi-Conductive Static-Dissipative Coatings

AIT ProductCharacteristicsSurface ResistivityAdhesion / HardnessPot-LifeCuring Schedule
EDC 9153-W (WHITE)
  • UV stable and blocking
  • Outstanding moisture barrier
  • Good adhesion to metals, woods and most plastics
  • Suitable for marine environments
  • Stable white color (Red, Green and other color available)
 108-109 ohm-square
  • >10ppi
  • >#2 pencil scratch resistant
 Non-curiing and stable in sealed container Ambient Drying @ 30 min.
EDC9153-B (BLACK)
  • UV stable and blocking
  • Outstanding moisture barrier
  • Good adhesion to metals, woods and most plasticss
  • Suitable for marine environments
  • Stable black color
 106-109 ohm-square
  • >10 ppi
  • > #2 pencil scratch resistant
 Non-curing and stable in sealed container Ambient Drying @ 30 min.

AIT ProductCharacteristicsSurface ResistivityAdhesion / HardnessPot-LifeCuring Schedule
EDC9133-W (WHITE)
  • UV stable
  • Excellent moisture barrier
  • Good adhesion to metals, woods and most plasticss
  • Suitable for marine environments
  • Stable white color (Red, Green and other color available)
 106-109 ohm-square
  • >5 ppi
  • > #2 pencil scratch resistant
 Non-curing and stable in sealed container Ambient Drying @ 30 min.
EDC9133-B (BLACK)
  • UV stable
  • Excellent moisture barrier
  • Good adhesion to metals, woods and most plasticss
  • Suitable for marine environments
  • Stable black color
 106-109 ohm-square
  • >5 ppi
  • > #2 pencil scratch resistant
 Non-curing and stable in sealed container Ambient Drying @ 30 min.

Semi-Conductive & Electrostatic Dissipative Adhesives

AIT ProductCharacteristicsElectrical ResistivityBond Strength (psi)
Peel Strength (ppi)		Pot-life (hrs)Curing Schedule
(50%RH @25°C)
EG9095 (Flexible Epoxy)
  • Carbon particulate filled
  • 2 part ambient curable epoxy
  • Flexible for large area bonding
  • More than 20 years of proven successes
  • May be diluted with MEK or suitable solvents for coating applications
 < 5x102 ohm-cm
  • >1200 psi
  • >6 ppi
 >300 48 hr.
EG9090 (Hard Epoxy)
  • Carbon particulate filled
  • 2 part ambient curable epoxy
  • High strength
  • More than 20 years of proven successes
  • May be diluted with MEK or suitable solvents for coating applications
 < 5x102 ohm-cm
  • >1600 psi
  • >9 ppi
 >300 24 hr.

Semi-Conductive & Conductive Rubber Sheets

AIT ProductCharacteristicsElectrical ResistivityWidth-Length
(ft-ft)		Thickness
(mil/mm)
EDS 9550 (Conformable Elastomer)
  • Carbon fiber particulate filled
  • For workbench lining
  • Flexible for large area coating -Fully cured elastomer
  • Heat resistant >150°C
  • Extremely conformable
 105-109 ohm per sq. >3.0 ppi
  • 20/0.50
  • 40/1.0
EDS 9555 (Pressure-sensitive)
  • Carbon fiber particulate filled
  • For workbench lining
  • Fully cured elastomer with pressure sensitive layer
  • Heat resistant >150°C
  • Extremely conformable and may be die-cut
 105-109 ohm per sq. NA
  • 5/0.12
  • 10/0.25
^  Top
Previous page: Melt-Bonding Lid-Shield  Next page: EMI/RFI Shielding Management Tips and FAQs