AIT manufactures some of the most unique semi-conductive adhesives, coatings and rubber sheets for electrostatic dissipative applications. The following tables list some representative products.

 

ESD Protective Coatings and Materials

 

Semi-Conductive & Static-Dissipative Coatings

 
AIT
Product
Characteristics
Electrical
Resistivity
 
Peel Strength
(ppi) 
Pot-life
(hrs)
Curing
Schedule
(50%RH
@25° C)
EDC 9100
(Flexible polymer coating)
-Carbon fiber particulate filled
-1 part ambient drying
-Flexible for large area coating
-Hydrophobic and water resistant
-Heat resistant to 105°C
-Good adhesion on metals, ceramics,  
  woods and plastics
105-109 ohm per sq.
 
>3 ppi
N/A
5 min.
EDC 9150
(Flexible polymer coating)
-Carbon fiber particulate filled
-1 part ambient drying
-Flexible for large area coating
-Hydrophobic and water resistant
-Heat resistant >150°C
-Good adhesion on metals, ceramics,  
  woods and plastics
105-109 ohm per sq.
>3 ppi
N/A
30 min.
EDC 9260
(Hard polymer coating)
-Carbon fiber particulate filled
-1 part ambient drying
-Hard scratch resistant protective coating
-Hydrophobic and water resistant
-In-situ crosslinked for stronger coat
 when used at higher temperature >90°C
-May be used for >150°C
-Good adhesion on metals, ceramics,  
  woods and plastics
105-109 ohm per sq.
>12 ppi
12 mos.
30 min.
+
In-situ curing under high termp use

 

Semi-Conductive & Electrostatic Dissipative Adhesives 

AIT
Product
Characteristics
Electrical
Resistivity
Bond Strength
(psi) 
Peel Strength
(ppi) 
Pot-life
(hrs)
Curing
Schedule
(50%RH
@25° C)
EG9095
(Flexible Epoxy)
-Carbon particulate filled
-2 part ambient curable epoxy
-Flexible for large area bonding
-More than 20 years of proven successes
-May be diluted with MEK or suitable solvents for coating applications
< 5x102 ohm-cm
>1200
psi
 
>6 ppi
>300
48 hr.
EG9090
(Hard Epoxy)
-Carbon particulate filled
-2 part ambient curable epoxy
-High strength 
-More than 20 years of proven successes
-May be diluted with MEK or suitable 
 solvents for coating applications
< 5x102 ohm-cm
>1600
psi
 
>9 ppi
>300
24 hr.

  

Semi-Conductive & Conductive Rubber Sheets

AIT
Product
Characteristics
Electrical
Resistivity
Width-Length
(ft-ft)
Thickness
(mil/mm)
EDS 9550
(Conformable Elastomer)
-Carbon fiber particulate filled
-For workbench lining
-Flexible for large area coating
-Fully cured elastomer
-Heat resistant >150°C
 
-Extremely conformable.
105-109 ohm per sq.
>3.0 ppi
20/ 0.50
 
40/ 1.0
EDS 9555
(Pressure-sensitive)
-Carbon fiber particulate filled
-For workbench lining
 
-Fully cured elastomer with pressure-sensitive layer
-Heat resistant >150°C
 
-Extremely conformable and may be die-cut
105-109 ohm per sq.

NA

 

5/ 0.12
 
10/ 0.25

 

 

 AIT, solve my problem!