EMI/RFI/EMP Shielding Solutions
 
 SHEET GASKET: Specialty Conductive Gasket

AIT
Product
Characteristics
Electrical
Resistivity
(ohm-cm)
Peel
Strength
(ppi)
Thickness
(mil/mm)
SPG 8006
(Pressure
Sensitive)
-Conductive pressure sensitive sheet that can be die-cut into any shape gasket to provide >120dB shielding against EMI/RFI . Extremely conformable.
<5x10-2 ohm-cm
>3.0 ppi
20/ 0.5
40/ 1.0
SPG 8056
(Dry &
Conformable)
-Conductive sheet (conductive coating on insulating silicone core) that can be die-cut into any shape gasket to provide >120dB shielding against EMI/RFI .
Available with one side conductive pressure-sensitive adhesive.
<5x10-2

NA
20/ 0.5
40/ 1.0
SPG 8055
(Dry &
Conformable)
-Conductive sheet (conductive coating on insulating silicone core) that can be die-cut into any shape gasket to provide >120dB shielding against EMI/RFI .
Available with one side conductive pressure-sensitive adhesive.
<5x10-4

NA
20/ 0.5
40/ 1.0

 
"SHEET-COATING™ ": Ease of Application in Pre-Cut Preform

AIT
Product
Characteristics
Electrical
Resistivity
Bond
Strength
Thickness
(mil/mm)
SPC 8015
(Pressure
Sensitive
Sheet-coating)
-Conductive pressure sensitive sheet laminate that can be applied onto plastic enclosure as "sheet-coating " to provide more than 60dB shielding effectiveness.
-It conforms to most common curvatures without spray-coating problems.
-The exposed surface is insulating to prevent bridging with devices.
<5x10-4 ohm-cm
>600 psi
3/
0.075
 SPC8513-1XCU
(Bondable
Copper Sheet)
-12 inch copper rolls with conductive pressure sensitive that can be die-cut and applied onto plastic and large area enclosure as "sheet-coating " to provide more than 60dB shielding effectiveness.
-It conforms to most common curvatures without spray-coating problems.
-The exposed surface is insulating to prevent bridging with devices.
 
1 oz copper liner
  
>3.0
ppi
  
3/
0.075
SPC 8055
(Conformable
Sheet-Coating)
-Conductive sheet laminate that can be melt-bonded onto plastic enclosure @60°C as "sheet-coating " to provide >60dB shielding effectiveness.
-It conforms to most common curvatures without spray-coating problems.
<5x10-4 ohm-cm
>600 psi
3/
0.075

COMPONENT-MODULE EMI/RFI SHIELDING: Covers & Lids
with Pre-Applied Conductive Preform
AIT
Product
Characteristics
Electrical
Resistivity
(ohm-cm)
Bond
Strength
Storage Life
CB 8250-E
(Pressure
Sensitive,
In-situ curable)
  • -Suitable for flat mating area of 250 micron or wider.
  • -Low cost pre-applied on your parts or your design.
  • -In-situ curing after bonding for bond strength at high temperature.

 5x10-4

>600 psi

12 Months min.
(Instant Melt-Bonding)
  • -Suitable for contour and flat area of 250 micron or wider.
  • -Low cost pre-applied on your parts or your design.
  • -Low melt-bonding and rework temperature @ 130°C

 5x10-4

 >600 psi

 12 Months min.

AIT, solve my problem!